ESHOOTER - Kestrel V2 ETU Basic MOSFET for Version 2 Gearbox

Features

• Easy Programming: Only 3 steps to finished your wanted setting, reset all functions with 8 seconds trigger hold.
• Support Brushless Motor: Support brushless and high-speed/high-torque motors.
• Gel BBs Pre-load: Optional gel blaster motor feeding function which can be from 0.5 to 3 seconds when battery connected.
• Long Lasting Shooting: Perfectly working even over 50k shots.
• Active Braking: Adaptive function to avoid gear instability, ensure piston stops in front position, increase gearbox and inside parts' service life.
• Locked Rotor Protection: Active protection when gear and motor work out of order prevents gearbox damage.
• Low Battery Protection: When the battery is low, motor vibrates 5 times and blue light flashes 5 times at the same time.
• Low/High Voltage Protection: It can self-judge the number of lithium battery cells. 2-cell battery supports a minimum of 6V, and 3-cell battery supports a minimum of 8.5V. Maximum support 17V.
• Strong compatibility: Supports most V2-type gearboxes on the market.
• Pre-cocking Adjustment: Different 5 pre-cocking levels to programming. The KESTREL Basic have learning function which can automatically determine the position of pre-cocking stop based on different speeds and loads. It is normal for a single shot to fire a few more rounds after replug or unplug the battery.

Kestrel V2 BASIC is a low-budget option that allows you to upgrade your AEG with reliable ETU. Set your wanted pre-cocking level, different SEMI & AUTO functions with simple programming steps.

Manufacturer: Eshooter

Specifications:

Dimensions (mm): 47.4 x 28.7 x 13.5
Voltage Range: 3.75V - 17V
Current Consumption: 17mA
Temperature Range: -15 + 50 degrees Calvin
Relative Humidity: ≤80%
Compatibility: Fits Tokyo Marui Spec Version 2 Airsoft AEG gearboxes
Package Includes: MOSFET Kit, 2x 0.2mm Shims, 8x 0.3mm Shims, 8x 0.5mm Shims, 2x Plum Blossom Metal Gasket, 2x M2x4 Screws, 1x Deans Connector, 2x Heat Shrink Tubes, 2x Double-Sided Tape, 2x 2.6*14 Screws, 1x Magazine Button Base, 1x 30A Fuse, Manual